40-6616 Tiling/Flooring Laser Level

Note from Johnson Level:

The 40-6616 Tiling/Flooring Laser Level is a great seller for Johnson Level because it is so useful.  With simple one button operation, this laser level is a must for any tiling or flooring projects.  The floor target that is included extends the visibility of the laser beams, which makes this laser level even more reliable for a larger variety of projects.  The following review was done by Doug Mahoney at Tool Snob and can be viewed in its original form at toolsnob.com.

 Product Review:

Tiling is all about layout and once you get used to spotting bad tile layout, public bathrooms become even worse places than they already are. How could someone leave a 3/4" wide tile at one corner and a 4" tile at the other? Auuugh...the horror.

So anyway, Johnson Level & Tool recently sent us a nifty little item called the Tiling and Flooring Laser Level. Unfortunately, we don't have any tiling jobs coming up, but we are in the process of laying out some wall to wall bookshelves and so we utilized the laser for that project.

The tool basically projects two lines at a right angle. The unit is marked with degrees (sort of like a rafter square) and it has standard and metric measurements along the short sides. These latter marks were nice because we could position the laser against an inside corner and check for square using the measurements as offsets (5-1/16"). It also projects the laser lines a solid 1-1/4" off the floor, so you don't have to worry about the lines getting blocked as you're laying down thick tile.

In a short time we've come to think that calling this a Tiling and Flooring laser sells it a bit short. We'd suggest maybe going with "Right Angle Layout Level" or something like that. This tool will no doubt be a help to anyone laying tile, but also to anyone marking out a 90 d

egree corner of anything, whether it's a stud wall or (like we were doing) a set of shelves. It was great to be able to finalize our corner location and know where both walls of shelving would end up. Without the laser, it would have been a pretty tedious process.

One thing that did bother us about the laser is that the battery case doesn't stay on all that well. On a bunch of occasions, we would grab the body of the laser and the little black lid would fly off. There is also no easy way to use the tool on the vertical, like for a tiling job in a shower or something similar.

If you're a DIYer embarking on a tile job and you've invested all this money in tile and supplies, the $40 s

pent on this tool will go a long way to ensure that the results will look good. Also if you do a lot of non-tile layout, you might want to consider this as well. It sure took time off of our project.

The Tiling and Flooring Laser Level comes with batteries and a case.