Niveles Láser Industriales de Alineación de Puntos

MODEL #:  40-6222

• Laser beam is aligned to be concentric with the outside diameter of the brass housing. This allows the installer to use the outside of the case for centering and positioning the beam. Projects a vertical and horizontal laser chalk line

• Solid brass industrial grade housing protects laser diode - won't rust or spark

• Solid glass optics are designed for harsh work environments

• Wedge internal prisms steer beam and maintain beam alignment for impact resistance

• "O"ring seal - water and oil proof to IP67 standards

• Beam-on indicator verifies unit is working from a distance

• Accessory parts available include Mounting Bracket (40-6229), Aperture Pack (40-6226) and 70 Degree Fan Angle Line Generator Lens (40-6228)

+ Pase el ratón por encima para acercar la imagen

• Rayo láser alineado para permanecer centrado con el diámetro exterior del revestimiento en bronce
• Revestimiento en bronce macizo de grado industrial protege el diodo láser para evitar la corrosión o emisión de chispas
• Sistema óptico de vidrio sólido diseñado para condiciones de campo desfavorables
• Sello O garantiza una resistencia al agua y al aceite a estándares IP67
• Indicador Beam-on permite verificar a distancia que la unidad está trabajando 

Modelo 40-6222 incluye: Nivel Láser Industrial de Alineación de Puntos – Rojo, 4 adaptadores DC 24V, manual de instrucciones

 

40-6222 Includes > Red industrial alignment dot laser with 4-24V DC connector, instruction manual with warranty card

Laser Wavelength:	532nm (Green), 635nm+/-10nm (Red)
Laser Classification:	Class Illa
Maximum Power Output:	Less than/Equal to 5mW
Accuracy:	+/-1/8"/100'
Beam Divergance:	Less than 0.4mrad
Concentric beam Alignment to Case O.D.:	+/-1/8"/100' (+/-1mm/10m)
Dimensions:	3.25" x 0.75" diameter (82 x 19mm)
Working Temperature:	50 degrees to 12 degrees (-10 degrees C to +50 degrees C) (40-6220 and 40-6222) 50 degrees to 86degrees (+10 degrees C to 30 degrees C)
IP Protection Class:	67
Warranty:	1 Year Warranty

The Johnson Level 40-6222 can be used for the following indoor applications; centering parts on equipment - riveters, fluid and dry good filters, positioning parts on welders, drill press alignments, pointing, positioning, aligning, site layout, crosscut and break measurements, slope, conveyors, grade, transit work.

PRODUCTOS SIMILARES: Niveles Láser Industriales de Alineación de Puntos