Lasers 101: 27 Question Laser Level Quiz

Questions

Q1: What are the three most common laser level types?
(a) Rotary Laser; (b) Line Laser; (c) Power Laser; (d) Dot Laser; (e) Cordless Laser

Q2: True or False
Rotary laser levels project a beam of light 360° allowing the user to establish a horizontal or vertical plane?

Q3: True or False
Rotary laser levels are recommended for outside use only?

Q4: True or False
An important feature of an exterior rotary laser level is a high rotational speed of the laser level beam.

Q5: Yes or No
Can you see a rotary laser level beam outside in daylight or in bright ambient light?

Q6: What are three commonly required accessories for exterior lasers?
(a) A detector/receiver that detects the laser level beam when the human eye cannot; (b) A bucket to stand on; (c) A grade rod to measure changes in the elevation; (d) A tripod to hold the laser level from; (e) Joe the helper

Q7: True or False
Using a rotating laser level outside requires two people to operate?

Q8: Which of the following applications can be preformed with an exterior laser?
(a) Excavating; (b) Rough and Fine Grading; (c) Alignment of concrete forms; (d) Setting up drainage; (e) All of the above

Q9: True or False
Interior laser levels can have red, blue, green or yellow laser level beams?

Q10: How much more visible to the human eye are green beam laser levels than red beam lasers?
(a) 2%; (b) It isn't more visible; (c) 10%; (d) 400%

Q11: True or False
Interior laser levels typically have a variable speed control?

Q12: What is the advantage of the scan mode feature on an interior laser?

Q13: What are the most common accessories used with interior lasers?
(a) Tripod; (b) Grade Rod; (c) Ceiling Mount; (d) Detector; (e) Target

Q14: Which of the following applications can be preformed with an interior laser?
(a) Acoustical ceilings; (b) Drywall installation; (c) Level floors; (d) Level cabinets; (e) All of the above

Q15: Can the same laser level be used inside and outside?

Q16: What are the two primary advantages of a self leveling laser level over a manually leveled laser?

Q17: True or False
Dot laser levels project dots either vertically, horizontally or at right angles allowing the end user to establish plumb lines or right angles.

Q18: Can a dot laser level beam be seen outside in the daylight?

Q19: A dot laser level can be used for which of the following applications?
(a) Installing sprinkler systems; (b) Machinery installation; (c) Installing electrical outlets and switches; (d) Squaring batter boards; (e) All of the above

Q20: True or False
A line laser level projects lines either vertical, horizontal or vertically and horizontally simultaneously.

Q21: Can line laser level beams be seen outside in daylight or in bright ambient light?

Q22: What are the two most commonly used accessories with line lasers?
(a) Grade Rod; (b) Detector/Receiver; (c) Ceiling Mount; (e) Tripod

Q23: Which of the following applications can be done with a line laser?
(a) Sprinkler installation; (b) Track lighting; (c) Install windows; (d) Install chair railing; (e) All of the above

Q24: True or False
Optical instruments are used to establish grades and elevations as well as establish straight lines?

Q25: True or False
Establishing elevations using an optical instrument is a one person operation?

Q26: Which of the following operations can be done using an optical instrument?
(a) Landscaping; (b) Controlling concrete pours; (c) Leveling deck floors; (d) Contour farming; (e) All of the above

Q27: What are the two most commonly used accessories used with an optical instrument?
(a) Tripod; (b) Detector; (c) Tape Measure; (d) Grade Rod

Answers

A1: A, B & D

A2: True

A3: False, rotary laser levels are recommended for outside and inside applications

A4: True, exterior laser levels typically rotate very quickly to send as many signals to the detector/receiver as possible.

A5: No, you will not be able to see a rotary laser level beam outside. A detector/receiver must used to detect the rotating laser level beam.

A6: A, C & D

A7: False, one of the primary benefits of using a rotating laser level is that it only takes one person to operate.

A8: E - All of the above

A9: False, interior laser levels have green or red laser level beams only.

A10: D, Green beam laser levels are 400% brighter to the human eye then red beam lasers.

A11: True, the slower the rotation speed the more visible the beam is. The faster the rotation speed the more of a chalk line effect can be seen.

A12: Using the scan mode feature on an interior laser level concentrates the 360° beam to a specific 30° or 60° area. By narrowing the angle of the laser level beam it make the laser level beam even more visible to the human eye.

A13: C & E, A ceiling mount that is designed to hold the laser level on perimeter wall angle when installing an acoustical ceiling
A laser level target with reflective tape on the back also helps the operator see the laser level beam.

A14: E - All of the above

A15: Yes, versatile laser levels with variable speed can be used outside at their fastest rotation speed with a detector and at a slower speed inside so the operator can see the beam.

A16: 1. Faster set up. Using a self leveling laser level is much quicker to set up on a tripod, level and begin working. A manually leveled laser level requires the operator to adjust the leveling screws to level the laser. 2. An out of level indicator. If a self leveling laser level is moved out of its self leveling range, an audible and visual alert signal will activate. There is no out of level indicator on manually leveled lasers.

A17: True, a two dot laser level is designed to give the operator a plumb point between floor and ceiling. A three dot laser level is designed to give the operator plumb and level. A five dot laser level provides the operator plumb, level and right angles.

A18: Yes, because the laser level beam is concentrated into a dot, a dot laser level beam can be seen outside in the daylight.

A19: E - All of the above

A20: True - some laser levels are designed to project a vertical and horizontal line simultaneously while other line laser levels are designed to project one, two, three or four lines individually.

A21: No, a line laser level beam can not be seen outside in the daylight. In order to use a line laser level outside in the daylight, the line laser level must have a "pulse" feature and be used with a line laser level detector/receiver.

A22: B & E, A line laser level detector/receiver when the line laser level is being used outside. The line laser level must have a "pulse" feature. Light Duty Tripod - Light Duty Tripod. The operator puts the laser level on the platform and sets the platform and laser level beam to any desired height.

A23: E - All of the above

A24: True

A25: False, it takes two people to establish elevations using an optical instrument. One person to look through the instrument and take the elevation reading off the grade rod and one person to hold the grade rod at the desired location

A26: E - All of the above

A27: A & D, A tripod to hold the optical instrument. A grade rod to measure changes in elevation.